Configuration and Operation
81
Scheduled Actions (Sched. Actions Screen)
The
Sched. Actions
screen is used for setting schedules for actions to be taken when an event
occurs.
Figure 87: Sched. Actions > Actions Tab
Each scheduled action includes the following two parameters: Actions and Schedule
To define an action
From the
Action
drop-down list, select one of the following actions:
Activate relay
output, Clear alarms, Arm camera, Disarm camera, Enable detection rule,
or
Disable
detection rule
. The selection is displayed at the top of the screen.
Activate relay output
Select
Activate relay immediately
or enter the number of seconds (1-999) in
After x seconds
drop-down list.
Select the Relay number.
Select the Activation signal:
Continuous – From the drop-down list, select
On
or
Off
.
Pulse activation – In the
Sec.
text box, enter the number of seconds for the
Pulse duration.
Click
APPLY
.