DVTEL CT-5322F, Руководство пользователя и инструкция по установке

Страница: 53 / 88

Using the Web Interface
39
Scenes with Large Objects or Many Objects
ioi Thermal offers enhanced detection in scenes where there are large or multiple objects, and there is
movement in up to 80% of the frame. This function is enabled by default in the
Advanced Settings area of
the Analytics > Firmware screen. To deselect this function, uncheck the checkbox and click Apply .
Enable Enhanced Detection
The unit’s analytic firmware includes an algorithm that improves the distance from which smaller objects are
detected. This function is disabled by default. To enable this function, check the checkbox in the
Advanced
Settings area of the Analytics > Firmware screen. To deselect this function, uncheck the checkbox and click
Apply .
7.2.7 Backup & Restore
The Backup & Restore screen enables you to create backup files of the unit’s analytics settings and to
restore them.
Figure 43: Analytics > Backup & Restore Screen
To back up the analytic firmware file
1. Click Backup .
To restore the analytic firmware file
1. Do one of the following:

To restore factory defaults, select To factory defaults .

To restore all defaults from a stored file, select Full restore from file , click Browse to locate the
file path, then select the file.

To restore analytic settings from a stored file, select Analytic settings from file , click Browse to
locate the file path, then select the file.
2. Click Restore .
Note:
Analytics firmware is stored in a separate file than the camera system software. To backup and
restore the camera system software version, see
Maintenance > System Update .
Refer to the HTML Edition Units User’s Guide for detailed instructions on configuring these settings.