DVTEL Ariel EN-204, Руководство пользователя и инструкция по установке

Страница: 98 / 112

EN-204 User and Installation Guide
86
5.4.7 Exception
An exception is an alarm triggered by a certain event or condition. The Exception screen is used to
define the actions taken upon the event.
To configure exception actions
From the sidebar menu, select Configuration > Exception . The Exception screen opens:
Figure 82: Exception Screen
From the Exception Type drop-down list, select one of the following options:

HDD Full – when a hard disk drive or the microSD card is full

HDD Error – when there is an error on a hard disk drive or the microSD card
 Network Disconnected
 IP Address Conflict
 Illegal Login
 Input/Output Video Standard Mismatch

Video Signal Exception

Record/Capture Exception

Resolution Mismatch
Note:
A video input resolution mismatch exception alarm occurs when the
resolution selected on the
Configuration > Camera Settings > Video
Settings screen and the actual video input resolution are mismatched.
See Video Settings (page 38).
 Check the actions in the Actions area:

Notify Surveillance Center – When an event occurs, an ONVIF alarm message is sent
to the remote client PC in the Video Management System.

Send Email – When an event occurs, an email is sent with alarm information to a user
or users. To configure email settings, see Email (page 63).