DVS SpycerBox, Руководство по оборудованию

Страница: 34 / 62

3-2
SpycerBox Hardware Guide
The SpycerBox hardware is now properly installed and you can switch
on the system as described in section “Starting the System” on
page 4-1.
3.2 Note about the Network Installation
Because of the amount of possible workflows that customer’s may use
the SpycerBox for as well as network connections (see section “Slot
Panel Connectors” on page 2-12), this document does not describe
how to connect the SpycerBox to a network or central storage. On the
DVS web page (http://www.dvs.de) you can find various diagrams
showing how the SpycerBox may fit in a workflow/network.
To connect the SpycerBox to a network/central storage you should
have experience as a network administrator and know how to set up
the required network connections on the installation site in hard- as
well as software. In case you experience difficulties during the installa-
tion, DVS offers you special assistance that will be tailored to your per-
sonal needs and which can range from remote diagnosis to on-site
services. Please contact the DVS service department for further infor-
mation about this.