DVS SpycerBox Ultra, Руководство по оборудованию

Страница: 25 / 72

2-7
Overview
2
1
3
4
5
I
A
2.1.6 Operation Items
With the operation items at the system’s front the hardware of the
SpycerBox Ultra can be controlled (e.g. turned on or off). There you can
also find LEDs that allow you to assess the state of the DVS system as
well as USB connectors.
Figure 2-9: Operation items overview
Further information about how to remove and exchange a
hard disk can be found in section “Hard Disk Maintenance” on
page 5-2.
disk carrier The disk carriers hold each one hard disk of the
array. The hard disks are mounted to the disk
carriers with several screws normally located at
the sides of the carriers.
lever Once the lever is unlatched with the opener, it
can be used to pull the disk carrier and its hard
disk out of the system.
opener Unlatches the lever and with it the disk carrier.
LED disk power Shows whether the disk of the disk carrier re-
ceives power.
LED disk activity Indicates the status of the hard disk of the disk
carrier (see also section “HDD LEDs” on
page 2-4):
off
Hard disk is idle.
green Hard disk is accessed.
red A hard disk or hard disk carrier related
error has occurred.
1 3 2 4 5
6 7 8