DVS Pronto2K, Руководство по оборудованию

Страница: 41 / 74

4-3
Operation
2
1
3
4
I
A
5
4.1.2 Shutting Down the System
There are several possibilities to shut down the Pronto2K/ProntoHD.
All possibilities depend on whether the operating system is already
loaded, or not. Please act accordingly:
With the operating system fully loaded
If the operating system is up and running, there are two ways to shut
down your video system:
1. Turn the system off by shutting down the operating system the
usual way.
The operating system will then save your personal settings and once
the program has ended, the system will turn off.
2. Alternatively, you can initiate a fast shut down by pressing the
main power switch briefly.
Some settings will be saved and afterwards the system turns off.
With the operating system not completely loaded
If the operating system is not completely loaded, perform the follow-
ing:
Pronto2K/ProntoHD delivered with 2 chassis:
To turn off the video system with the Pronto2K/ProntoHD delivered
with 2 chassis you have to shut down the main system first. After
that you can turn off the disk array of the Pronto2K/ProntoHD.
You have to turn off the power on both casings.
For this perform the following:
! Shut down the main system as described in the procedures
below.
! Then shut down the disk array by pressing its main power switch
until the power supply of this casing turns off.
The Pronto2K/ProntoHD delivered with 2 chassis is then shut down
and turned off.
The fast shut down may not save all your system data
and personal settings before the system turns off. Oc-
casionally, this may lead to a loss of system data.
After shut-down wait at least ten seconds before starting the
system again. This time is needed to safely erase all memory
banks of the system.