Operation manual - Spider ILD01G
51 / 53
rev. 02-15-02-2017
14 WARRANTY CONDITIONS
This document sets out the extent, conditions and manner of exercising rights stemming from the
Manufacturer’s liability for defects of the delivered Product
1.
Dvořák – svahové sekačky s.r.o., registered office Pohled 277, 582 21 Pohled, Czech Republic,
ID No. 2601379 (further referred to as “Manufacturer”) provides a Warranty for new Products according to
the set regulations
2.
For commercial machines (Spider ILD01, Spider ILD02 and higher) and accessories for the period of
24 months from the day the Product is delivered to the Customer, or from such a Product being set
into operation, or up to 800 operating hours, according to whichever happens first.
3.
For other machines and accessories for the period of 12 months from the day the Product is delivered
to the Customer, or from such a Product being set into operation. For any natural person the warranty
has to comply with current legislation.
4.
For new spare parts delivered under Warranty the Warranty period expires together with the Warranty
period of the whole Product/machine.
5.
Claims stemming from the Warranty must be exercised with the Distributor / Dealer and also resolved by
them. A properly completed Warranty sheet must be presented and all of the inspections prescribed by the
Manufacturer must have been implemented. Incorrect information, additional extracts or overwriting on the
Warranty card lead to loss of the Warranty.
6.
The Warranty applies to defects on the Product caused by defective raw materials, construction faults or
made workmanship. Defective parts on the Product will be replaced free of charge with a new part or
repaired. No entitlement to immediate delivery is created and the Manufacturer takes on no liability for
damage claimed for as a result of delayed delivery.
7.
The Warranty does not relate to regular wear and tear (parts susceptible to regular wear and tear especially
include the following: blades, blade hubs with bearings spark plugs, air filters, belts, chains, tires, sealing,
hydraulic hoses, winch rope etc…).
8.
The Warranty cannot be claimed against if the cause of the defect is:
a) The effects of external mechanical or chemical influences on the Product
b) Unreasonable handling of the Product, overloading it, neglect or incorrect operation
c) Repair of maintenance of the Product performed by a third party, which was not authorised to carry out
such work by the Distributor / Dealer or Manufacturer
d) Installation of such parts into the Product, the use of which is not approved by the Manufacturer
e) Implementation of changes to the Product, which were not approved by the Manufacturer
f)
The fact that the Manufacturer’s regulations were not adhered to for handling the Product, its
maintenance and treatment (e-g. the instruction and maintenance manual), especially if the prescribed
Warranty inspections were not carried out
g) The fact that the user neglected declaration and removal of defects, which were apparent when they
took receipt of the Product or which they did not immediately provide notification of an have removed,
when they arose later
9.
In case of Products sold with a discount the Warranty does not extend to defect for which the discount was
granted.
10. All claims stemming from the Warranty are forfeit on expiry of the Warranty period. In the case of defects,
for which notification was made during the course of the Warranty period and which were not removed during
this period, this Warranty remains valid until the defect is removed. In this case, the Warranty is terminated
at the latest within 1 month of the last repair or after declaration by the Distributor / Dealer that the defect
was removed or that this does not concern a defect.
11. The Manufacturer is not liable for any economic loss or for any subsequent damage caused to persons or
their property, which was created as a result of failure of the Product.