Operation manual - Spider ILD01G
44 / 53
rev. 02-15-02-2017
11.16 CHANGING THE WHEEL
Change the wheels on a level, firm surface
Turn the wheel so that the tightening nut are accessible
from the outside
Stop the engine, remove the key from the ignition
Secure the machine against movement.
Lift the mower and support it under the cutter deck
Ensure the machine safe & supported before working
on it.
Loosen the wheel nuts, remove the wheel
After repairing it, attach the wheel back in the reversed
order.
Use suitable tools to unscrew the nuts
11.17 TYRE PRESSURE
Keep the specified tyre pressure. Other values may
unfavourably influence the riding characteristics especially
on slopes. You may even loose control of the machine.
(recommended and max. tire pressure - 300 kPa / 3,0 bar
/ 43 PSI)
11.18 MOWING HEIGHT ADJUSTMENT MECHANISM
Keep the moving parts of the slide way clean, undamaged
and without an excessive clearance