DVI-7410 EDID MANAGER
Quick Start Guide
Firmware version: 1.26
DVI IN (PC) Connector
EDID manager's DVI input
Connect the DVI source to this connector
SOURCE CONNECTED LED
Indicates if the connected DVI source is powered
ON (detects presence of +5V signal on DVI IN
connector)
DVI SIGNAL DETECT LED
Indicates if a live DVI signal is applied to DVI IN
connector ( detects TMDS Clock channel )
DVI OUT (MONITOR)
EDID manager's DVI output connector
Connect to sink or display
MONITOR PRESENT LED
Indicates if a monitor is attached to the DVI OUT
connector ( detects Hot Plug signal )
POWER LED
Green if the EDID MANAGER is powered ON
BURN Button
Reprograms the attached DVI Matrix switcher’s
input EDID data
LEARN Button
Stores the attached monitor’s EDID data
Status LED
Three color LED displaying the status of the EDID
Manager
GREEN
Valid EDID data is selected by rotary switches
RED
Empty memory or invalid EDID is selected
GREEN Flashing
Burn or Learn has been effected successfully
RED Flashing
Burn or Learn process failed
MEMORY ADDRESS
Rotary switches for selecting one of 100 EDID
memories
9-12 VDC Power Connector
Power input connector, center pin positive. The
connector is protected from reversed polarity.
