DVIGear DVI-4141, Руководство пользователя

Страница: 6 / 9

VI. CONNECTING THE HARDWARE
Prior to connecting the unit, ensure that all devices have been
powered off.
1) Connect your DVI display to the switch’s DVI output with a high-
quality cable
2) Connect your four (4) DVI sources to the switch’s inputs using a
high-quality DVI cable.
3) Plug the 9VDC power adapter in to the rear of the unit.
4) Plug the power adapter in to an AC socket.
5) Power on all source and display devices.
V. OPERATING THE UNIT
It is possible to select the input device you wish to access in two ways:
using the front panel push button or via the enclosed remote control
unit.
1) Front Panel Push Button Selection:
• The front panel push button is used to select the source to be dis-
played on the screen. Pressing the button during normal operation will
cause the input devices to be toggled through.
2) Remote Control Selection:
• The input device may selected via the included remote control by
pressing the appropriate button (“1” for the source on input 1 and “2”
for the source on input 2 and so on).
Note: If you have a problem with the IR control conflicting with other
devices, the remote allows users to configure four (A, B, C, D) alternate
combinations of IR codes. To change, press and hold an IR code but-
ton for 2 seconds.