Dustbane 355 Pro Series, Руководство по эксплуатации и запасным частям

Страница: 19 / 28

SYSTEM START-UP
1 Ergonomic handle
2 Power cord
3 Hose
4 Telescoping extension
5 Switch
6 Carryng handle
7 Cord winding device
8 Cover
9 Vent grid
10 Container
11 Engine housing
12 Electric brush
13 Base
14 Hi/Low vac motor switch
CONNECTING THE HOSE
Insert the rotating sleeve into the bag-holding sleeve, insert the second rotating sleeve into the telescoping element, and hook
the hose to the handle.
OPERATING THE TELESCOPING EXTENSION
Extend the telescoping extension by pulling it; block it by turning the dedicated ring nut counter-clockwise.
STARTING THE BRUSH
Push the unhook pedal downwards and tilt the vacuum-cleaner body.
CHECKING THE BRUSH
The brush-checking device continuously monitors the operation of the brush:
Green light: the brush is working correctly
Red light: the brush is either blocked or it is undergoing excessive stress
Turn the machine off, detach the plug from the mains, and look for the cause of the blocking.
FILTER FULL INDICATOR
If the “bag full” gauge turns red, please verify:
a) whether the dust bag is full, or
b) whether the brush is clogged, or
c) whether the vacuuming hose is clogged; in these cases, remove the obstruction
d) whether the Hepa filter is fully clogged
It is normal that during vacuuming the “bag full” gauge partially turns red, because the hose is closed.