Durr EcoGun AS MAN 1AF, Руководство по эксплуатации, Страница: 8 / 36

Fig. 2: Assembly
3. Screw flow cup with air support (3) on the
thread of the material connection.
4. Connect cup air hose (1) to the overpres-
sure valve (2) and throttle check valve
(4).
Do not disturb the overpressure
valve (2) and throttle check valve
(4). Valves are already factory-
set.
5. Connect air hose to the air connection
(5).
For water-based materials, you
can also use compressed air
quick couplings.
6. Check air hose for correct seating.
5 Commissioning
Protective equipment:
Protective gloves
Safety boots
Protective workwear
Eye protection
Respiratory protection device
Use ear protection
Requirements:
Flow cup with air support and cup air sup-
port have been assembled Ä 4.2
“Assembly”.
1. Rinse the spray gun before filling it with
paint Ä 6.6.3 “Rinsing spray gun”:
Using solvent for solvent-based paints
Use water for water-based paints
2.
NOTICE!
Maintain a distance of 20 mm between
upper paint border and cup edge.
Fill paint in the flow cup.
3. Create a trial spray pattern on a test work
piece.
Commissioning
11/2017 EcoGun AS MAN 1AF - MSG00020EN 8/36