Durr EcoGun 249, Руководство по эксплуатации

Страница: 9 / 24

9
Eco Gun 249
COMMISSIONING
Before commissioning the gun must be cleaned from preservative
substances by suitable degreasing agent – flush the gun with solvent
suitable for the coating material to be applied.
The gun is factory adjusted and prime-sprayed (quality
test).
Pressure air is to be supplied through following hose:
»
up to 10 meters -nominal inner diameter 8 mm
»
over 10 meters - nominal inner diameter 9,5 mm
o
Ptions for coating material suPPly
EcoGun 249 model spraying gun features following supply options:
»
Lower supply - Fluid connector AM 38 (fitting G 3/8“)
d
irect connection of air quick
-
couPlings to the gun
The gun design enables connection of air quick-couplings to the
gun. The air input fitting may house the quick-coupling mandrel, e.g.
type SFIW 13 from RECTUS.
The manufacturer recommends to use brand quick-couplings with
low pressure loss and long operating life.
The quick-couplings may be used to the air inlet only
during application of water-based coating materials, which
do not require electro-static drop-in.
ADJUSTING OF GUN
The gun does not require any adjustment, when basic maintenance
requirements are followed. Each gun is factory adjusted and prime-
spayed. Upon disassembly and reassembly due to replacement of
the nozzle assembly or worn components it is necessary to inspect
adjustment of following elements.
Gun 249