5
Operation
The intraoral camera consists of a handpiece and
various interchangeable heads. The function of
the camera depends on the function of the inter-
changeable head. The interchangeable head is
recognisable from the symbol on the rear.
Cam inter-
changeable
head
Intraoral images
Proof inter-
changeable
head
Intraoral images for the
detection of caries,
plaque and calculus
Proxi inter-
changeable
head
Intraoral images for the
detection of caries in
the approximal region
1
2
3
1
2
1
Focus button
2
Trigger button
3
Contacts for interchangeable head
The interchangeable head is plugged onto the
handpiece and connected via the contacts. A
guide prevents incorrect placement of the inter-
changeable head.
There are two buttons on each side of the hand-
piece: the focus button and trigger button. The
pressure point of the buttons is noticeable.
The focus button is used to focus the camera
sharply on the object. The focal plane is preset
on the spacer during placement of the Proof or
Proxi interchangeable head, but can be changed
with the focus button.
Still images and video recordings can be created
with the camera. The function of the trigger but-
ton is dependent of the recording mode in the
imaging software (still image or video). In the Still
Image mode, the camera switches between Live
mode (moving image) and Freeze mode (still
image). In Video mode, the recording starts or
stops. Pressing the trigger button causes the
camera to vibrate slightly. Optionally, a foot
switch can also be used for triggering.
The illumination is incorporated in the inter-
changeable head. The optical element is divided:
One part is in the handpiece, the other part is in
the interchangeable head.
The image sensor in the handpiece digitises the
image. The camera transmits the image to a
computer via the USB connection cable.
The connection cable is used to connect the
camera directly to the USB connection of the
computer or, optionally, to the handpiece holder
with USB hub.
Imaging software from Dürr Dental is required for
the camera.
The power supply of the camera to the computer
is realised via the USB connection cable.
The camera switches off automatically if it is not
moved for one minute. As soon as the camera is
moved, it switches on again.
Product description
2109100026L02 1907V001
13
EN
