Durr Dental Power Tower Silence 200, Инструкция по установке и эксплуатации

Страница: 12 / 48

10
A949100002L02 1806V002
Assembly
Installation type Line layout (minimum
requirements)
Fixed installation – Shielded sheathed cable
(e.g. (N)YM (St)-J)
Flexible – PVC data cable with
shielded cable sheath-
ing, as used for
telecommunications and
IT processing systems
(e.g. type LiYCY)
or
– Lightweight PVC control
cable with shielded
cable sheathing
6.5 Information about connecting
cables
The diameter of the connections depends on
the current consumption, length of line and the
ambient temperature of the unit. Information
concerning the current consumption can be
found in the Technical Data supplied with the
particular unit to be connected.
The following table lists the minimum diameters
of the connections in relation to the current con-
sumption:
Current consumption of
unit [A]
Cross-section
[mm
2
]
> 10 and < 16 1.5
> 16 and < 25 2.5
> 25 and < 32 4
> 32 and < 40 6
> 40 and < 50 10
> 50 and < 63 16
Mains supply cable
Installation type Line layout (minimum
requirements)
Fixed installation – Plastic sheathed cable
(e.g. type NYM-J)
Flexible – PVC flexible line
(e.g. H05 VV-F)
or
– Rubber connection
(e.g. H05 RN-F or
H05 RR-F)
Display panel
Installation type Line layout (minimum
requirements)
Fixed installation – CAT5.e network cable
Flexible – ISDN standard cable
with connectors
or
– Network patch cable
Control cable
24 V protective low voltage for:
– Hose manifold
– Place selection valve
– Spittoon valve
EN