Durr Dental 2032-50 Скачать руководство пользователя страница 36

Страница: 36 / 56

13.3 Preparation at the operating

location

Wear protective gloves.

Wear protective goggles.

Use a mask.

Use protective clothing.

WARNING
Risk of infection from contaminated
products

Danger of cross contamination

❯

Reprocess the product correctly and
promptly before its first use and after
every subsequent use.

Rinsing the handpiece with water

❯

Fill the fluid container to approx. 1/3 with water.

❯

Place the handpiece in a sink or in a suitable
container.

❯

Start the rinsing process:
Press the RINSE button for at least 2 seconds.

RINSE

❯

The LED flashes – the rinsing process takes
around 30 seconds and ends automatically.

Pre-cleaning

Do pre-cleaning of handpiece and acces-
sories no more than 15 minutes after the
unit has been used.

❯

Clean the exterior surfaces completely with two
cleaning cloths

. Make sure that the surfa-

ces are sufficiently moistened.

❯

Note the action time of the cleaning agent.

❯

Perform the procedure twice.

❯

Draw 3 x 20 ml cold water (temperature
< 20 °C) into a conventional sterile 20-ml dis-
posable pipette with Luer connection and rinse
the inner lumen of the handpiece.

20 ml

Transport

❯

Protect the device from contamination when
you transport it from the treatment chair to the
reprocessing location.

13.4 Dismantling the handpiece

❯

Unscrew the instrument, "Inserting/changing
instruments".

❯

Take off the removable parts of the handpiece,
"Disassembly".

Usage

9000-615-32/02 2012V003

Содержание 2032-50

























































Результаты поиска

Содержание 2032-50

Отзывы:

Бренды по названию

Популярные бренды

Durr Dental 2032-50, Инструкция по установке и эксплуатации

Результаты поиска

Содержание 2032-50

Отзывы:

Бренды по названию

Популярные бренды