Winder
Service manual H867 Version 00.0 - 08/2013
69
Installing the winder
16.Fit the winder on the machine arm.
17.Screw the winder screws (1) firmly in place.
15.3 Setting the hook thread guide
The position of the hook thread guide determines how the thread is wound
onto the winder.
Correct setting
The thread is wound on evenly over the entire width of the bobbin.
Figure 56: Setting the hook thread guide
Setting steps
1. Loosen the screw (1).
2. Turn the hook thread guide (2):
•
To the front:
The thread will be wound on further to the front.
•
To the rear:
The thread will be wound on further to the rear.
2
1
(1) - Screw
(2) - Hook thread guide
Содержание M-TYPE H867
Страница 1: ...H867 Service manual...
Страница 91: ......
