manualshive.com logo in svg

Dürkopp Adler D669, Руководство по эксплуатации

Поделиться
Скачать
Dürkopp Adler D669 Скачать руководство пользователя страница 130

Programming

128

Operating Instructions D669 M-TYPE DELTA - 00.0 - 10/2020

5.10 Performing a software update

A software update - for control panel or control - is always performed 
on the control panel. The software of the control is updated auto-
matically whenever a software update is performed for the control 
panel. The files necessary for updating the control are already 
included in the file updates of the control panel.

To perform a software update:

1.

Log in as a user with the access rights necessary to perform 
a software update (see 

p. 48

 on how to define this setting).

2.

Download the software version from the Internet 
(www.duerkopp-adler.com) and save it to a USB key.

3.

Plug the USB key into the port on the control panel.

4.

Open the burger menu and select the menu 

Settings

 - 

Software Update

.

A window listing the files stored on the USB key opens.

5.

Select the file containing the software update.

Another window opens.

6.

To start the software update, press on the 

Start Update

 

button.

7.

Wait until advised that the USB key can be removed OR that 
the control panel was restarted.

Information

If detecting - while the control panel is being restarted - that the 
software of the control requires an update as well, the system will 
start this update automatically.

It may take up to 15 minutes for the system to complete the update 
and restart the control panel successfully.

8.

Once the control panel has been restarted, the machine can 
be used again.

9.

If you have not already done so, you can now remove the 
USB key.

Содержание D669



































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды