Dürkopp Adler 878-160722-M, Руководство по эксплуатации

Страница: 113 / 180

Operating Instructions 878-M PREMIUM - 06.0 - 11/2021 111
6.6 Using Automatic mode
Automatic mode is comprised of all stored programs.
To access the Automatic mode:
1. Press the symbol to bring up the navigation pane.
 This opens the navigation interface.
Fig. 64: Using Automatic mode (1)
Last bartack section
The last section of the bartack can be
programmed with a different number of
stitches. All previous sections have the
preset number of stitches from the settings
for the end bartack.
On/Off
Number of stitches
Value range
01 to 50
Invert bartack direction
Normally, a bartack starts either with the
sewing direction (forwards – even number
of sections) or against the sewing direction
(backwards – odd number of sections),
depending on the number of sections.
Setting this parameter inverts the sewing
direction of the bartack.
Value range
On/Off
Icon Parameter Settings
(1) - Automatic mode
①