Dürkopp Adler 806N-111, Руководство по эксплуатации

Страница: 95 / 162

Programming
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020 93
5.6.9 Activating the advance roller
The advance roller is a piece of additional equipment. It is required when
the sewn products are so short that the standard outfeed roller cannot
reach them in the sewing area.
The advance roller path cannot be set. It rolls the finished product forward
until it can be reached by the outfeed roller. This interplay is made possible
through the use of a light barrier.
To activate the advance roller:
1. Press the Advance roller button .

The button is highlighted in green.

In the next sewing cycle the advance roller transports the finished
product to the outfeed roller.
2. Press the Advance roller button again to deactivate this mode.

The button is no longer highlighted in green.

The advance roller is no longer active in the next sewing cycle.
This setting remains stored after switching off the machine, after loading
a different seam program or after an EMERGENCY STOP.
5.6.10 Setting the sewing motor speed
The speed of the sewing motor can be set between 100 and 4000 rpm.
A speed reduction is useful, for example, if you want to sew stepwise or
without folding.
To set the sewing motor speed:
1. Press the Motor speed button .

The Motor speed selection window opens.
Fig. 73: Setting the sewing motor speed