Dürkopp Adler 806N-111, Руководство по эксплуатации

Страница: 48 / 162

Operation
46 Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
2. Pull off the pneumatics.
3. Briefly and firmly press the right side of the transfer plate (2) until the
connection is released.

On the right side (2), the transfer plate is no longer connected to the
transfer frame.
4. Briefly and firmly press the left side of the transfer plate (1) until the
connection is released.

On the left side (1), the transfer plate is no longer connected to the
transfer frame.

The transfer plate is no longer connected to the transfer frame.
5. Remove the transfer plate by pulling it out at the front so that it passes
underneath the outfeed roller.
4.12.2 Inserting the shaping assembly
Insert the shaping assembly components in the order specified here.
This is how you achieve a correctly inserted shaping assembly.
Inserting the transfer plate
Fig. 32: Inserting the transfer plate (1)
To insert the transfer plate:
1. Push through the transfer plate, with the metallic lug aligned upwards
to the right, underneath the outfeed roller and place it underneath the
transfer frame.
NOTICE
Property damage may occur!
The machine can be damaged if the shaping assembly components
are not inserted correctly.
Check that all components in the shaping assembly are securely
fixed.
Correct the position of incorrectly inserted parts.