Dürkopp Adler 667 PREMIUM, Инструкция по эксплуатации

Страница: 101 / 150

Programming
Service Instructions 667 PREMIUM - 03.0 - 01/2018 99
14.7.11 Setting the Access rights (
Lock
) parameter
The access to certain functions and areas can be restricted for the user.
If an access lock is set, it is shown in both the Manual and Automatic
modes. A key symbol appears on the display, on the right next to the
program number.
Various settings can be made for the access rights. The possibilities are
explained in more detail in the table.
Menu item Setting option
Enter
Set your own access password for the Technician level.
00000
corresponds to the password preset by Dürkopp Adler. Do not lose the
new password!
(Value range 00000 – 99999)
Key
Mode for accessing the Technician level
Code
Access via defined password only
USB
Access via USB key with access file only
USB + Code
Access via defined password or USB key with
access file.
Security
Key
The defined password is saved as a file to a USB key. The USB key
provides access with this password on all machines. The file stored on
the USB key cannot be copied.
Prog.Switch
The last active program is fixed on the Operator level. It is not possible
to change to a different program.
(Value range: On/Off)
Manual
Selective restriction of areas in Manual mode
R/W – Read/Write
Off – Area is hidden
R/O – Read Only
Parameters
Restriction of access to the parameters
(Value range R/W, Off)
Stitch length
Restriction of access to the stitch length
(Value range R/W, OFF, R/O)
Thr.Tens.
Restriction of access to the needle thread tension
(Value range R/W, OFF, R/O)
Foot Press.
Restriction of access to the foot pressure
(Value range R/W, OFF, R/O)
Foot Stroke
Restriction of access to the sewing foot stroke
(Value range R/W, OFF, R/O)