Dürkopp Adler 1767, Инструкция по эксплуатации

Страница: 98 / 128

Programming
96 Service Instructions 1767 - 00.0 - 12/2016
19.2 Thread button group functions
Using the Thread button group you can set or activate:
• Start bartack
• Multiple start bartack
• End bartack
• Multiple end bartack
• Thread cutter
• Thread clamp
• Needle position after sewing stop
• Sewing foot lift after thread cutter
• Sewing foot lift after sewing stop
• Soft start
• Speed
19.2.1 Setting the start bartack
The start bartack secures the seam at the seam beginning. If a seam
consists of backward stitches only, one speaks of single bartacks.
A seam of forward and backward stitches is called a double bartack.
Single bartack
To set the single bartack:
1. Press .

The LED at the lower right illuminates.
2. Press the
B+
button from the Programming button group repeatedly
until the required number of backward stitches is reached.
You can begin sewing; press the pedal forward to pedal po1.
Double bartack
To set the double bartack:
1. Press twice.

Both LEDs illuminate.
2. Press the
A+
button from the Programming button group repeatedly
until the required number of forward stitches is reached.
3. Press the
B+
button repeatedly until the required number of backward
stitches is reached.
You can begin sewing; press the pedal forward to pedal po1.
To deactivate the start bartack press .