DURKOPP ADLER PURE 967, Руководство по эксплуатации

Страница: 21 / 84

Operation
Operating Instructions 967 PURE - 00.0 - 12/2020 19
4.3 Inserting or changing the needle
Order
After switching to a different needle strength, adjust the distance
between hook and needle and change the distance piece for
the loop support. If using a different needle system, you need
to adjust the height of the needle bar (

Service Instructions ).
Disturbance
Disturbance after inserting a thinner needle:
• Skip stitches
• Thread damage
CAUTION
Risk of injury from sharp and moving parts!
Puncture possible.
Switch off the machine before you insert or
change the needle.
Do not reach into the needle tip
NOTICE
Property damage may occur!
There is a risk of machine damage, needle breakage or
damage to the thread if the distance between hook and
needle is incorrect.
Check and, if necessary, readjust the distance to the hook tip
and the loop support after inserting a needle with a different
size.
Check and, if necessary, readjust the height of the needle
bar after inserting a needle with a different needle system.
Adjust the distance piece between driver and loop support
after inserting a needle with a different size (

Service
Instructions ).