DURKOPP ADLER H-Type 969, Инструкция по эксплуатации

Страница: 11 / 90

Basic Principles of Working with the Machine
Service Instructions 969 - 01.0 - 12/2015 9
3 Basic Principles of Working with the Machine
3.1 Sequence of the settings
The setting positions for the machine are interdependent.
Always adhere to the specified sequence for the individual setting steps.
Always observe all the information on requirements and following settings
marked at the side with .
3.2 Cable routing
Ensure that all cables in the machine are laid in such a way that they do
not impair the function of the moving parts.
1. Lay any excess cabling neatly in proper cable snakes.
2. Tie the snakes together using a cable tie.
If possible, bind the snakes to fixed parts.
The cables must be fixed firmly in place.
3. Cut any excess material off the cable tie.
NOTICE
Risk of machine damage due to incorrect sequence.
Always adhere to the working sequence specified in these
instructions.
NOTICE
Machine damage and malfunctions can be caused by laying
the cables incorrectly.
Excess cabling may prevent moving machine parts from functioning
correctly. This will affect the sewing operation, and may cause
damage.
Lay excess cabling as described above.