DURKOPP ADLER beisler 2112-5, Инструкция по эксплуатации

Страница: 46 / 104

Programming
44 Service Instructions 2112-5 - 00.0 - 02/2020
8.4 System menu
The system menu is divided into several submenus.
The submenus are, in turn, divided into open and access-protected
submenus.
Open submenus
Open submenus are freely accessible from the start level:
• Enter the service code ( 
p. 45
)
• Check the clamp motor steps
• View the total piece counter (

p. 45
)
Access-protected submenus
Access-protected submenus can only be opened after the service code
has been entered:
• Eprom sewing parameters ( 
p. 46
)
• Copy seam numbers ( 
p. 47
)
• Erase seam ( 
p. 48
)
• Enter seam name ( 
p. 48
)
• Copy seam program to memory stick ( 
p. 49
)
• Download seam program from memory stick ( 
p. 49
)
• Copy variables (global parameters/special parameters) to memory
stick ( 
p. 50
)
• Download variables (global parameters/special parameters) from
memory stick ( 
p. 50
)
• Run the clamp motor in continuous operation ( 
p. 51
)
• Check thread trimmer ( 
p. 51
)
8.4.1 Calling up and exiting the system menu
To call up the system menu from the start level:
1. Press the key.
 The system menu is called up.
To confirm your input and exit the system menu:
1. Press the key.
 The input is confirmed.
You exit the system menu.
All input for the system menus must be started from submenu level 1.