DURKOPP ADLER 911-210-3020-10 Скачать руководство пользователя страница 81

Страница: 81 / 128

Programming

Operating Instructions 911-210-10 - 00.0 - 06/2020

5.13 Testing the functions of the machine

You can use the

Extras

Service

Multitest (Multi

test)

menu item to check the inputs and outputs, test the sewing motor

and set the stroke position.

Fig. 50: Testing the functions of the machine

Information

The

Transportklammer (Transport clamp)

function

is only intended for use by Dürkopp Adler Service personnel.

5.13.1 Testing inputs and outputs

Important

The instructions only provide an overview of the test possibilities.

The tests may only be performed by qualified specialists that have re-
ceived training from Dürkopp Adler.

To test inputs and outputs:

In the menu item

Extras

Service

Multitest (Multi

test)

press the

Eingänge / Ausgänge testen (Test

inputs

outputs)

option.



The

IO Test

Seite (Page)

window is displayed.

WARNING

Risk of injury from sharp and moving parts!

Puncture or crushing possible.

Do NOT reach into the machine during function
testing of inputs and outputs.

Содержание 911-210-3020-10

































































































































Результаты поиска

Содержание 911-210-3020-10

Отзывы:

Похожие инструкции для 911-210-3020-10

Бренды по названию

Популярные бренды

DURKOPP ADLER 911-210-3020-10, Руководство по эксплуатации

Результаты поиска

Содержание 911-210-3020-10

Отзывы:

Похожие инструкции для 911-210-3020-10

Бренды по названию

Популярные бренды