DURKOPP ADLER 911-210-3020-10, Руководство по эксплуатации, Страница: 68 / 128

Programming
66 Operating Instructions 911-210-10 - 00.0 - 06/2020
2. Press the desired seam program.

The selected seam program is highlighted with a dark background.
3. Press the Einfügen (Insert) button.

The seam program is transferred to the seam sequence and is
displayed in the
Sequenz (Sequence)
field on the left side of
the screen.
4. Add further seam programs in the same manner.
Removing a seam program from a seam sequence
To remove a seam program from a seam sequence:
1. Press the seam program in the
Sequenz (Sequence)
field and
then press the Löschen (Delete) button.

The seam program is removed from the seam sequence.
Assigning a name to a seam sequence
To assign a name to a seam sequence:
1. Press the Namen eingeben (Set name) button.

The window for entering the name of the seam sequence opens.
2. Enter the desired name and adopt the change by pressing
OK (CR) (

p. 43 ).

The seam sequence is now available under this name for sewing,
editing or copying.
5.10.5 Editing a seam sequence
You can edit an existing seam sequence by adding or removing seam
programs.
To edit a seam sequence:
1. Open the seam program you wish to modify via the menu items Datei
(File)
>
Öffnen (Open)
.

The seam sequence opens on the start screen.
2. Press the menu items
Bearbeiten (Edit)
>
Sequenz
(Sequence) .

The window for editing the seam sequence appears.