DURKOPP ADLER 911-210-3020-10, Руководство по эксплуатации

Страница: 55 / 128

Programming
Operating Instructions 911-210-10 - 00.0 - 06/2020 53
5.10 Seam programs and seam sequences
5.10.1 Creating a new seam program
New seam programs are created using a Teach-In procedure.
Individual seam paths with specific sewing parameters are defined via
the control panel in order to do this.
To create a new seam program:
1. Press the menu items
Datei (File)
>
Neu (New)
>
Nahtprogramm (Seam Program) .

The Teach-In window appears.
Fig. 35: Creating a new seam program
Defining the starting point
2. Define the starting point:
(1) - Cursor position
(2) - Cursor
(3) - Arrow buttons
(4) - OK button: Accept
(5) - Save button
(6) - Delete button
(7) - Parameter button
(8) - Line selection buttons
②
③
④
⑤
⑥
⑦
⑧
①
Method Coordinate area
Using the arrow buttons (3)
Caution
For safety reasons, you cannot use the arrow buttons (3)
to select a position beyond 90.1 or -92.6 on the Y-axis.
Settings beyond these coordinates require that you use
the pedal.
X -150 to X 230
Y 90.1 to Y -92.6
Using the pedal
Every press of the pedal moves the cursor (2) by 0.1 in
the direction of the selected axis (X or Y)
X -150 to X 230
Y 100 to Y -100
Entering coordinates directly via the cursor position (1) X -150 to X 230
Y 100 to Y -100