DURKOPP ADLER 911-210-3020-10 Скачать руководство пользователя страница 54

Страница: 54 / 128

Programming

Operating Instructions 911-210-10 - 00.0 - 06/2020

Checking or changing the bobbin

To change or check the bobbin:

Press the

Spulenwechsel (Bobbin change)

button.



The display shows a prompt asking whether you wish to reset the
bobbin counter.

Press the

JA (YES)

button if you wish to change the bobbin.



The bobbin counter will be reset.

Press the

NEIN (NO)

button if you merely wish to check the bobbin.



The bobbin counter will not be reset.

Remove the transfer plate.

Press the

Einfädelmodus (Threading mode)

button on the machine

head.



The hook cover opens.

Change or check the bobbin.

Press the

Einfädelmodus (Threading mode)

button on the machine

head.



The hook cover closes.

Press the pedal forwards.



The machine moves into the insertion position.

Insert the transfer plate.

10. Press the pedal or press the

Weiternähen (Continue Sewing)

button.



The machine moves to the sewing position.

11. Press the pedal or press the

Weiternähen (Continue Sewing)

button.



The sewing procedure is resumed.

5.9

Resetting the counter

Depending on the machine parameter settings, the counter counts
the sewn programs or seam sequences up or down. You can use the

Zähler-Reset (Reset Counter)

button to reset the counter

to the start value (



p. 75

To reset the counter:

Press the button

Zähler-Reset (Reset Counter)

on the

start screen.



The counter is reset to the value defined in the machine parameters.

Содержание 911-210-3020-10

































































































































Результаты поиска

Содержание 911-210-3020-10

Отзывы:

Похожие инструкции для 911-210-3020-10

Бренды по названию

Популярные бренды

DURKOPP ADLER 911-210-3020-10, Руководство по эксплуатации

Результаты поиска

Содержание 911-210-3020-10

Отзывы:

Похожие инструкции для 911-210-3020-10

Бренды по названию

Популярные бренды