DURKOPP ADLER 911-210-3020-10 Скачать руководство пользователя страница 51

Страница: 51 / 128

Programming

Operating Instructions 911-210-10 - 00.0 - 06/2020

5.7.1 Changing the bobbin

Fig. 32: Changing the bobbin

To change the bobbin:

Press the

Spulenwechsel (Bobbin change)

button.

Change the bobbin (



p. 48

Use the

Vor (Forwards)

and

Zurück (Back)

buttons to

move to the point where sewing is to continue.

Press the

Weiternähen (Continue sewing)

button.



The program jumps back to the start screen and sewing of the seam
continues from the selected point.

5.7.2 Bobbin change without a request from the program

If you wish to independently insert a new bobbin without being requested
to do so by the program, you have to press the

Spulenwechsel (Bobbin

Change)

button on the start screen after changing the bobbin.

This will inform the program that a new bobbin has been inserted, causing
it to resume counting thread consumption starting with the full bobbin
capacity.

5.7.3 Updating the bobbin capacity

To update the bobbin capacity:

Press the button

Spulenwechsel (Bobbin Change)

the start screen.



The counter for the bobbin capacity begins anew with a full bobbin.

Содержание 911-210-3020-10

































































































































Результаты поиска

Содержание 911-210-3020-10

Отзывы:

DURKOPP ADLER 911-210-3020-10, Руководство по эксплуатации, Страница: 51 / 128

Результаты поиска

Содержание 911-210-3020-10

Отзывы: