DURKOPP ADLER 550-12-33, Руководство по эксплуатации

Страница: 74 / 200

Programming
Operating Instructions 550-12-33/34 - 00.0 - 08/2017 72
Assigning a softkey function to the upper softkey (1)
Information
The upper softkey can only be assigned one new softkey function
at a time.
To assign a softkey function to the upper softkey (1):
1. Press button 1 / 2 / 3 / 4 / 5 under the desired softkey function and
the upper softkey (1) at the same time.

The function is assigned to the upper softkey (1) and can
subsequently be called up using this softkey.
Removing a softkey function from the upper softkey
To remove the softkey function from the upper softkey:
1. Press the upper softkey (1) and button 6 at the same time.

The upper softkey (1) is no longer assigned a function.
5.3.3 Sewing in manual mode
To sew in manual mode:
Sewing without ruffling
1. Press button 0 to set the ruffling value to 0.
2. If necessary, change values such as stitch length and thread
tension.
3. Press the pedal forward to position 1 and sew.
Information
If the seam is not entirely smooth, adjust the stretch value for the
ruffling value of
0 (

p. 113 ).