DURKOPP ADLER 550-12-33, Руководство по эксплуатации

Страница: 104 / 200

Programming
Operating Instructions 550-12-33/34 - 00.0 - 08/2017 102
10. Use
▲
/
▼
to select the desired seam section.
11. To add additional seam sections, press the upper softkey .
12. To delete the current seam section, press the button .
Exiting edit mode
13. To exit edit mode, press the ESC button.

The seam program is saved.
The machine switches to automatic mode, and the edited
seam program is selected and can be sewn right away.
5.6.4 Editing existing sewing sections
The seam sections of existing seam programs can be edited in
edit mode at any time.
Important
These changes ONLY apply to the current seam section rather
than the entire seam program.
To adjust the current seam section of an existing seam program:
1. Switch to edit mode (

p. 90 ).
2. Use
◄
/
►
to switch to the selection.
3. Use
▲
/
▼
to select the desired seam section.