DURKOPP ADLER 512-211-01, Инструкция по эксплуатации

Страница: 56 / 82

Settings via software
54 Service Instructions 512-211-01/532-211-01 - 00.0 - 06/2016
11.24Loading software via a USB stick
If a new version of the software becomes available, it can be downloaded
from www.duerkopp-adler.com and loaded onto a USB stick.
Important
The following files must be saved to the USB stick:
• FUYSTS.BT
• LEEYSTS.BT1
• BT1mot
• BT1PAT
11.24.1Loading the main program
1. Switch on the controller.
2. Insert the USB stick.
3. Press the USB button and wait approx. 3 seconds.
4. Press the Memory button.
5. Press the +/- Function buttons to set value 5 in the Function display.
6. Press the Selection button.

The process for downloading to the controller starts.
Important
If a value is no longer shown in the Function display, the download pro-
cess is complete. Now wait at least 25 seconds , otherwise it could corrupt
the controller!
7. Switch off the controller.
8. Remove the USB stick.
11.24.2Loading sewing patterns
1. Switch on the controller.

The current software version is briefly displayed.
2. Insert the USB stick.
3. Press the USB button and wait approx. 3 seconds.
4. Press the Memory button.
NOTICE
Property damage may occur!
Damage to the machine as a result of interrupting the copying
process.
Never remove the USB stick during the copying process.
Only remove the USB stick after observing the specified time period.