DURKOPP ADLER 512-211-01 Скачать руководство пользователя страница 49

Страница: 49 / 82

Settings via software

Service Instructions 512-211-01/532-211-01 - 00.0 - 06/2016

11.19.2Editing parameters in level M2

Prerequisite:

• The machine is in the programming mode, the LED in the

Ready

button

is off.

Press and hold the

Memory

button for 6 seconds.



The controller beeps 2x; the LED in the button illuminates.
The

Program

display shows the parameter numbers; the

Function

display shows the values.

Press the

+/- Program

buttons to select other parameters.

Press the

Ready

button to confirm the parameter.



The LED in the button illuminates.

Press the

+/- Function

buttons to change values.

Press the

Reset

button to reset a changed value.

Press the

Ready

button to save a change.



The LED in the button switches off.

Press the

Memory

button.



The LED in the button switches off.

11.20Resetting parameters to factory settings

Prerequisite:

• The machine is in the programming mode, the LED in the

Ready

button

is off.

Press and hold the

Memory

button for 6 seconds.



The LED in the button illuminates.

Select parameter number U098 by using the

+/- Program

buttons.

Press the

Ready

button.

Enter the function value 1 by using the

+/- Function

buttons.

Press the

Selection

button.



The controller beeps 1x. If the controller beeps 3x, the reset was
unsuccessful.

Set parameter U085 for class 532.

Setting parameter U085 (class 532)

After resetting the parameters to the factory setting, parameter U085 must
be set for the button sewing machine.

Prerequisite:

• The machine is in the programming mode, the LED in the

Ready

button

is off.

Содержание 512-211-01



















































































Результаты поиска

Содержание 512-211-01

Отзывы:

Похожие инструкции для 512-211-01

Бренды по названию

Популярные бренды

DURKOPP ADLER 512-211-01, Инструкция по эксплуатации

Результаты поиска

Содержание 512-211-01

Отзывы:

Похожие инструкции для 512-211-01

Бренды по названию

Популярные бренды