DURKOPP ADLER 512-211-01 Скачать руководство пользователя страница 43

Страница: 43 / 82

Settings via software

Service Instructions 512-211-01/532-211-01 - 00.0 - 06/2016

11.9 Winding

Prerequisite:

• Needle removed.

• Needle thread not threaded.

Press the

Ready

button.



The LED in the button illuminates.

Press the

Ready

button.



The LED in the button switches off.

Press the

Selection

button until the

Wind

LED illuminates.

Press the

Ready

button.



The LED in the button illuminates, the clamp is lowered.

Press the pedal forwards.



Winding starts.

To stop winding, briefly press the pedal completely forwards.

Press the

Ready

button.



The LED in the button switches off, the clamp is raised.

11.10Sewing

Prerequisite:

• The machine is in the sewing mode, the LED in the

Ready

button is illu-

minated.

• Needle fitted.

• Needle thread threaded.

• Sewing pattern selected.

Insert the material.

Press the foot pedal forwards to the first position.



The clamp is lowered.
If the pedal is released, the clamp is raised.

Briefly press the foot pedal completely forwards.



The sewing process starts. At the end of sewing the clamp is auto-
matically raised.

Содержание 512-211-01



















































































Результаты поиска

Содержание 512-211-01

Отзывы:

Похожие инструкции для 512-211-01

Бренды по названию

Популярные бренды

DURKOPP ADLER 512-211-01, Инструкция по эксплуатации

Результаты поиска

Содержание 512-211-01

Отзывы:

Похожие инструкции для 512-211-01

Бренды по названию

Популярные бренды