DuraVision FDU2101, Руководство пользователя, Страница: 30 / 54

30
Chapter6Reference
●
To switch among input signals
Procedure
1. Choose “Tools” from the Adjustment menu, and press .
2. Choose “Input” from “Tools”, and press .
3. Select “D-SUB” or “DVI” with or .
4. Press to exit.
When the signal is switched, the active input port name appears at the top right corner of the screen.
●
To set input signal selection
Setting Function
Auto ThemonitorrecognizestheconnectorthroughwhichPCsignalsareinput.
WhenaPCisturnedofforentersthepowersavingmode,themonitorautomatically
displaysanothersignal.
Manual ThemonitordetectsonlythePC’ssignalscurrentlydisplayingautomatically.Selectan
activeinputsignalintheAdjustmentmenu.
Procedure
1. Choose “Tools” from the Adjustment menu, and press .
2. Choose “Input Selection” from “Tools”, and press .
3. Select “Auto” or “Manual” with or .
4. Press to exit.
Note
• When “Auto” is selected for “Input Selection”, the monitor’s power saving function works only when all PCs are in the
power saving mode.