DURAG D-R 290, Руководство по эксплуатации

Страница: 131 / 202

7 | Checking / setting parameters with D‑ESI 100
D-R 290 131
Measured value correction
if necessary with a third degree polynomial
(factory pre-setting: OFF)
Zero range correction
if necessary
(factory pre-setting: OFF)
Measured value output
(output at current output 4…20mA)
Table 7.5: Measured value correction
A measured value correction can be performed separately for each channel. The cor­
rection is categorised into various steps (see the diagram above).
Integration time
Each channel has an integration memory ( Integration time [
}
195] ) which can be set
to a value between 1 s and 180 s (factory default setting: 30 s).
Offset a0
An offset ( offset or adjustment offset [
}
195] ) can be added to or subtracted from the
measured value (see Fig. [
}
132] ).
Setting path:
Site map > »Device (e.g. D‑R 290 ) > >
Common parameters > Variables
setting >
> Offset a0 > [PARAMETER]
(change the value manually)
Fig. 7.6: Common parameters D‑R 290 Variables setting I
7.5.3.2
7.5.3.3