DURAG D-LX 200, Руководство пользователя

Страница: 12 / 116

General
1.2 Typographical conventions
In order to make the text of this manual clear, text elements such as safety
instructions, warnings, tips, keyboard symbols, menu addresses etc. are
displayed differently.
The following conventions apply in this manual:
Safety instructions and warnings appear as follows in this manual:
WARNING
Danger from electrical equipment
Before removing the housing or accidental-contact protection, the equipment
must be disconnected from the power supply.
A note or tip is shown like this:
Rotary switches S1 to S8 do not have a stop. The switch can be turned from
switch position F to switch position 0.
Explicitly identified paragraphs only refer to the specified device variant. All
other information applies for both device variants.

This DIP switch is OFF

This DIP switch is ON

A (

) indicates that the following term is explained in the glossary.

Unless otherwise specified: all dimensions in mm

This manual is also available as a pdf file on CD/DVD!
1.3 Meaning of the warnings and notes used
Please always comply with the following warnings and safety instructions in
this manual. They serve to avert
dangers to life and limb of users and
maintenance personnel and to prevent damage to property.
They are highlighted in this manual by the signs defined here. They are also
marked by symbols at the points where they appear. The signs used have the
following meanings for the purposes of this manual and the information on the
product itself:
DANGER
Failure to comply with instructions highlighted in this way can result in severe
and even fatal injuries.
Also means that substantial damage to property can occur, if the relevant
precautions are not taken.
> Comply with all hazard warnings, in order to prevent injuries.
12
D − LX 200, D − LX 720