Duraflame DFS-400-01 Скачать руководство пользователя страница 1

MODELS: DFS-400-01,DFS-400-02,DFS-400-04,DFS-400-06,DFS-400-10,DFS-400-15

© 2019, Twin-Star International, Inc. 

Delray Beach, FL 33445

VOLTAGE

120 VAC, 60 Hz

AMPS

12.5 Amps

WATTS

1500 Watts

PRODUCT SPECIFICATIONS

OPERATING INSTRUCTIONS

For Customer Service:

tsicustomerservice.com

(+1) 888-674-7517

8:30 a.m.-5:30 p.m., EST, Monday-Friday

Manufactured and distributed by Twin-

Star International, Inc., under license from 

Duraflame, Inc. duraflame, the flame 

symbol and logo are registered trademarks 

of Duraflame, Inc.

Note: When first running the heater there may be an odor. This is normal 

as the heater has a surface coating on the internal parts. For the first 

several hours of operation, the coating reacts with the internal parts to 

permanently protect them. The odor is safe; if you are sensitive to the 

odor, it is recommended to run the heater in a well-ventilated area until 

the odor dissipates.

Warning: This is an unvented, electric appliance. DO NOT attempt to 

burn wood or manufactured firelogs in or on this appliance or grate.

Go to tsicustomerservice.com for product warranty registration

Control Panel Location

Control Panel Location

1. The Power switch supplies power to all of the functions of 

the Fire Cube.

2. Turning on the Power Switch will turn on the flame effect.

The power Switch must be in the ON position to use the heater.

OFF

Heater off   

L

Low heat setting, 750 Watts.

H

High heat setting, 1500 Watts.

OPERATING INSTRUCTIONS

The manufacturer warrants that your new Electric Stove is free from manufacturing and material defects for a period of one year from date of puchase, subject to 

the following conditions and limitations.

1. Install and operate this Electric Stove in accordance with the installation and operating instructions furnished with the product at all times. Any unauthorized 

repair, alteration, willful abuse, accident, or misuse of the product shall nullify this warranty.

2. This warranty is non-transferable, and is made to the original owner, provided that the purchase was made through an authorized supplier of the product.

3. The warranty is limited to the repair or replacement of part(s) found to be defective in material or workmanship, provided that such part(s) have been subjected 

to normal conditions of use and service, after said defect is confirmed by the manufacturer’s inspection.

4. The manufacturer may, at its discretion, fully discharge all obligations with respect to this warranty by refunding the wholesale price of the defective part(s).

5. Any installation, labor, construction, transportation, or other related costs/expenses arising from defective part(s), repair, replacement, or otherwise of same, will 

not be covered by this warranty, nor shall the manufacturer assume responsibility for same.

6. The owner/user assumes all other risks, if any, including the risk of any direct, indirect or consequential loss or damage arising out of the use, or inability to use 

the product, except as provided by law.

7. All other warranties – expressed or implied –with respect to the product, its components and accessories, or any obligations/liabilities on the part of the manu-

facturer are hereby expressly excluded.

8. The manufacturer neither assumes, nor authorizes any third party to assume on its behalf, any other liabilities with respect to the sale of the product.

9. The warranties as outlined within this document do not apply to non accessories used in conjunction with the installation of this product. 

10.This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

This warranty is void if:

a. The fireplace is subjected to prolonged periods of dampness or condensation.

b. Any unauthorized alteration, willful abuse, accident, or misuse of the product.

c. You do not have the original receipt of purchase.

IF WARRANTY SERVICE IS NEEDED

Contact the manufacturer by calling customer service department at 1-888-674-7517, 7 days a week 24 hours a day

at our toll-free help line. Our Consumer Service department is available Monday – Friday 8:30 am – 5:30 pm EST.  

Make sure you have your warranty, your sales receipt, location of purchase and the model/serial number of

your product.

IMPORTANT INSTRUCTIONS

SAVE THESE 

INSTRUCTIONS

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons including the following:

1.  Read all instructions before using this appliance.

2.  This appliance is hot when in use. To avoid burns, do not let bare skin touch hot

      surfaces. If provided, use handles when moving this appliance. Keep 

      combustible materials, such as furniture, pillows, bedding, papers, clothes and

      curtains at least 3 feet (0.9 m) from the front of this appliance and keep away

      from the sides and the rear.

      WARNING: In order to avoid overheating, do not cover the heater.

3.  CAUTION: Never leave the heater operating unattended. Extreme caution is

      necessary if unsupervised children or invalids are nearby.

4.  The appliance is not to be used by children or persons with reduced physical,

      sensory or mental capabilities, or lack of experience and knowledge, unless

      they have been given supervision or instruction.

5.  Always unplug this appliance when not in use.

6.  Do not operate any heater with a damaged cord or plug or after the appliance

      malfunctions, or if it has been dropped or damaged in any manner.

7.  If the supply cord is damaged, it must be replaced by the manufacturer, its

      service agent or similarly qualified persons in order to avoid a hazard.

8.  Do not use outdoors.

9.  This heater is not intended for use in bathrooms, laundry areas and similar 

      indoor locations. Never locate this appliance where it may fall into a bathtub or

      other water container.

10.  Do not run cord under carpeting. Do not cover cord with throw rugs, runners, 

       or similar coverings. Do not route cord under furniture or appliances. Arrange 

       cord away from traffic area and where it will not be tripped over.

11. To disconnect this appliance, turn controls to the off position, then remove

      plug from outlet.

12. Do not insert or allow foreign objects to enter any ventilation or exhaust 

      opening as this may cause an electric shock or fire, or damage the 

      appliance.

13. To prevent a possible fire, do not block air intakes or exhaust in any 

      manner. Do not use on soft surfaces, like a bed, where opening may

      become blocked.

14. This appliance has hot and arcing or sparking parts inside. Do not use it 

      in areas where gasoline, paint or flammable liquids are used or stored.

      This stove should not be used as a drying rack for clothing. Christmas 

      stockings or decorations  should not be hung in the area of it.

15. Use this appliance only as described in the manual. Any other use not 

      recommended by the manufacturer may cause fire, electric shock or

      injury to persons.

16. This product is equipped with a polarized plug (one blade is wider than 

the other blade). To reduce the risk of electrical shock, this plug will fit 

into a polarized outlet only one way. This is a safety feature. If you are 

unable to insert the plug into the electrical outlet, try reversing the plug. 

If the plug still does not fit, contact a qualified electrician. Always plug 

heaters directly into a wall outlet/ receptacle. This heater is for use 

on 120 volts. Never use with an extension cord or relocatable power 

tap(power strip).

1-YEAR LIMITED WARRANTY

C689

Heater Settings

Power Switch

Phillips Head Screwdriver

Clear, 40-watt, E12 socket base light bulb

(candelabra base, B bulb).

BULB REPLACEMENT

Tools Required for Assembly

1. Loosen the Phillips head 

screws and open the back 

panel.

2. Loosen the Phillips head screws 

and open the back panel.

3. Pinch this spring clip to loosen. Gently 

turn and pull the rubber grommet of 

the motor shaft.

4. Pull away the bulb retaining spring, 

unscrew the old bulb, and replace with 

a new 40w candelabra bulb.

1

2

3

4

Flame Generator 

Drive Motor

Light bulb

spring clip

rubber 

grommet

Pull

Pull

Light bulb retaining spring

Отзывы: