Durafit DFIHE002, Инструкция по эксплуатации

Страница: 7 / 20

8. Assembly instructions
Step 1: Install the machine
A:) Lift the machine out of the package and put it on the ground. Hold the column tube with your
hand and set it up. Place the aluminium knob (long) on the plastic gasket, then thread it into the
column and fasten it clockwise (as shown).
B:) Hold the instrument panel with your hand and rotate it backwards. Put the aluminium knob
(short) on the plastic gasket, and then screw it into the column and the instrument frame to fix it
clockwise (as shown).
C:) Rotate the instrument cluster to the appropriate angle and then secure the pivot screw with a
6mm L-wrench.
3
2
Plastic gasket
1
Step 2: Place the red safety switch magnet end on the yellow label position in the middle of the
instrument. The whole machine is assembled.
Important: Locate the red security lock in the
kit, place the end of the magnet on the yellow
label on the meter, and press the start button
to run.
- 5 -