Durafit DFIHE002, Инструкция по эксплуатации

Страница: 14 / 20

Lubricating oil
When the treadmill is shipped from the factory, it is lubricated. However, the treadmill's lubricate is
often checked to help keep the treadmill in optimal use. The treadmill must be lubricated after one
year of use or 100 hours of operation.
After 30 hours or 30 days of use, pull up the running belt from the side and reach the surface of the
running platform as far as possible. If you feel silicone oil, you don't need to add lubricating oil; if
you touch the surface, it has a strong feeling of dryness. Please follow the instructions below for
lubrication.
Please use non-petroleum silicone oil
◆
How to add lubricant to the treadmill
1. The position of the refuelling is in the running position of the lower surface of the running belt.
(As shown below)
2. Cut the mouth of the oil bottle into a small mouth, not too big, to be able to inject.
3. Lift the running belt to extend the oil bottle to the bottom of the running belt and inject the oil
into the middle of the running board. Put down the running belt, press the oil part by hand, turn the
running belt, and spread the oil evenly on the running belt;
4. After turning on the machine, wait a minute for the oil to be applied evenly and then use the
treadmill.
Clean up

Clean up frequently to ensure the life of the treadmill.

Warning: When cleaning the treadmill, the power must be cut off and the power cord must
be disconnected from the outlet.

After each use: Wipe the instrument and other parts with sweat and debris with a clean towel
or a damp cloth.

Note: Do not use corrosive materials; do not use liquid materials, so as not to damage
electronic components. Do not expose the electronic components to the sun.

Every week:Clean the ground once a week, and clean the dirt and other debris on the
- 12 -