- 17 -
helps keep the treadmill in the best State. Treadmill in use years or after 100 hours of
operation, you must add lubricant.
Every 30 hours of use or after 30 days, from within the side-wing with the start reached
encouraged to touch the running surface, touch silicone oil, you do not need to add oil if you
touch the surface when there is a strong sense of dry, please follow the instructions for
lubricating operations.
Use of non-petroleum silicone oil
◆
How to add lubricant Oil
：
①Oil tube is in the backside of the running board.(as in below pic)
②Cut the oil bott
le a little,not too much.
③
Raise the running belt so that the oil bottle reaches the bottom of the running belt and the
oil is injected into the middle of the running board. Put down the running belt, press the oil
injection area by hand, and turn the running belt to evenly spread the oil on the running belt.
④After power on, wait a minute let the oil automatically evenly, using a treadmill.
Cleaning
Cleaned regularly, to ensure the treadmill life.
⚫
WARNING
：
Running in the cleaning machine, you must cut off the power supply, power
cord must be pulled from the socket.
⚫
After Using
：
With a clean towel and damp cloth wipe perspiration meters and other
parts and service.
⚫
NOTICE
：
Do not use corrosive materials, do not use liquid stuff, so as not to damage the
electronic components. Don't let the electronic components exposed to the Sun.
⚫
Weekly
：
Once every week to clean up the ground, dirt from shoes and other debris on
