Duplomatic EWM-2SS-DAD/22E-PN, Руководство для стартапов

Страница: 13 / 50

EWM-2SS-DAD/22E-PN 89475/119 ETM
Duplomatic MS ▪ EWM-2SS-DAD/22E-PN Start-up Manual – 89475-PN/119 ETM --- Mar 2019
13
TECHNICAL DESCRIPTION
Input and output signals
Connection Supply
PIN 3, PIN 31 and
PIN 35 Power supply (see technical data)
PIN 4, PIN 32 and
PIN 36 0 V (GND) connection.
Connection Analogue signals
PIN 11 0 V (GND), potential for analogue input signals, internally connected to PIN 4
PIN 12 0 V (GND), potential for analogue output signals, internally connected to PIN 4
PIN 13 Analogue input position actual value (X1), sig nal range 0… 10V or 4… 20 mA, scalable
PIN 14 Analogue input position actual value (X2), signal range 0… 10V or 4… 20 mA, scalable
PIN 15 / 16 Valve control signal axis 1.
Type of signal and polarity can be selected by the parameter SIGNAL:U1.
PIN 19 / 20 Valve control signal axis 2.
Type of signal and polarity can be selected by the parameter SIGNAL:U2.
Connection SSI sensors
PIN 33 Power supply for sensor 1
PIN 34 0 V (GND) for sensor 1
PIN 37 CLK +
PIN 38 CLK -
PIN 39 DATA +
PIN 40 DATA -
PIN 47 Power supply for sensor 2
PIN 48 0 V (GND) for sensor 2
PIN 41 CLK +
PIN 42 CLK -
PIN 43 DATA +
PIN 44 DATA -
Connection Digital inputs and outputs
PIN 8 Enable input: This digital input signal initializes the application. The signal will be
approved combined with the Enable of the corresponding axis.
PIN 1 READY output: when ON the module is enabled; there are no discernible errors.
When OFF Enable is deactivated or an error has been detected.