Duplo DF-1200 Скачать руководство пользователя страница 9

Страница: 9 / 98

iii

Safety Precautions

Maintenance / others

Do not damage the power cord or power plug.

Do not scratch, alter, bend, twist, pull or place heavy objects on the power cord or power plug.
This could result in damage, a fire or an electrical shock.

Do not touch the power switch with wet hands.

Otherwise electric hazards may occur.

Do not remove the cover or back panel.

This unit contains high-voltage components that could cause an electrical shock.

Do not disassemble, modify or repair this unit.

There is a danger of fire, electrical shock or injury.
Contact your dealer when repairs are necessary.

If any foreign object such as metal or liquid should enter this unit,

immediately turn the unit off at the power switch and disconnect the power

plug from the power outlet.

Failure to do so could result in a fire or an electrical shock.
Contact your dealer immediately.

Before cleaning this unit, turn the unit off at the power switch and disconnect

the power plug from the power outlet.

Accidental operation of the unit during cleaning could result in injury.

If the unit emits smoke, unusual heat or unusual odors, immediately turn the

unit off at the power switch and disconnect the power plug from the power

outlet.

Failure to do so could result in a fire or an electrical shock.
Contact your dealer immediately.

Remove any dust that accumulates on the power plug prongs and the surface

of the plug from which the prongs extend.

Accumulated dust could result in a fire.

Always grip the plug when disconnecting the power plug from the power

outlet.

Forcibly pulling on the power cord could cause damage, resulting in a fire or an electrical shock.

Because of its structure, there are tiny protruding objects inside the unit. Be

careful when putting your hand inside the unit.

This could result in injury.

Do not touch or insert foreign objects into any rotating part during operation.

This could result in injury.

Содержание DF-1200



































































































Результаты поиска

Содержание DF-1200

Отзывы:

Бренды по названию

Популярные бренды

Duplo DF-1200, Инструкция по эксплуатации

Результаты поиска

Содержание DF-1200

Отзывы:

Бренды по названию

Популярные бренды