manualshive.com logo in svg

Duplo DF-1200, Инструкция по эксплуатации

Поделиться
Скачать
Duplo DF-1200 Скачать руководство пользователя страница 62

3-22

Chapter 3 Advanced Operation

7-4.  Paper feed interval time setting

By changing feed interval the time lag that exits after one sheet is fed and until the next is fed can be 

changed. Set the feed interval to [Slow] if [Feed Err Misfeed] occurs with thick, heavy paper even after air 

volume, etc. has been adjusted.
Setting the feed interval to [Fast] will raise processing performance, but feed error may be more likely to 

occur with large sheets of paper such as B4, A3, etc.

Other Setting1/5

 Feed Interval

 Stack Roll Adj

 Belt Convey Vol

1 

Press the menu key to display [Other 

Setting].

2 

Select [Feed Interval] with the   or   key.

Feed Interval

Normal

3 

Press the 

 key.

The [Feed Interval] screen is displayed.

4 

Press the 

 key.

At this stage the feed interval can be changed 

to [Normal], [Fast], or [Slow].

5 

Use the   or   key to select the mode.

Feed Interval

Fast

6 

Press the 

 key.

The selected item is set.

7 

Press the 

 key.

Returns to [Other Setting].

8 

Press the 

 key.

Returns to the top screen.

Содержание DF-1200



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды