Duplo DF-1200 Скачать руководство пользователя страница 61

Страница: 61 / 98

3-21

Chapter 3 Advanced Operation

A4 +0.0/

Ready

Press the

key.

The display returns to the top screen, an icon

will be displayed on the LCD display.

A4 +0.0/

Ready

• Be sure to test fold before starting paper

folding when the double-feed detection

setting is set to [ON]. The machine will not

start if test folding is not performed even

when the start key is pressed. The icon shown

in the figure on the right will be displayed if

test folding is performed.

A4 +0.0/

Ready

• Double-feed will not be detected when using

the paper with the length of 250 mm/9.84

inches or less, even if the double-feed

detection setting is set to [ON]. The icon will

be changed as shown in the figure when using

the paper with the length of 250 mm/9.84

inches or less.

• The data on paper thickness read by test folding will be cleared by changing the [Thickness] in the

double-feed detection setting. Test fold again when the setting is changed.

• Be sure to perform test folding every time printing materials are changed to different ones

even if the quality and thickness of paper used are the same. Double-feed may not be

detected correctly if processing is started without test folding.

• Double-feed detection may not work properly if printing on paper is uneven or paper is

misaligned.

• Repeat test folding if double-feed occurs on test folding after double-feed detection is set to

[ON]. Double-feed will not be detected correctly if paper is processed with the same settings

as when double-feed is detected on test folding.

When mis-detection occurs

Double-feed or miss-feed may sometimes be detected although the paper is fed normally.

• If false double-feed detection occurs when paper thickness is set to [Thin], repeat test folding after setting

paper thickness to [Thick]. If false detection continues to occur after selecting [Thick], double-feed cannot

be detected. Set the double-feed detection to [OFF]

• If false miss-feeding detection occurs when paper thickness is set to [Thick], repeat test folding after

setting paper thickness to [Thin]. If false detection continues to occur after selecting [Thin], double-feed

cannot be detected. Set the double-feed detection to [OFF].

Содержание DF-1200



































































































Результаты поиска

Содержание DF-1200

Отзывы:

Бренды по названию

Популярные бренды

Duplo DF-1200, Инструкция по эксплуатации

Результаты поиска

Содержание DF-1200

Отзывы:

Бренды по названию

Популярные бренды