Duplo DF-1000 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 86

background image

3-12

4. FUNCTION SETTING MODE

4-2. Operation Mode Setting

Setting to the last time fold mode or folding stopper ﬁxed mode enables setting operations
after power ON to be omitted, thus shortening the time to the start of work. At shipment, this is
set to the normal mode.

(1) Last time fold mode

Function which starts the unit at the settings used the last time when the power is turned ON.
When set to this mode, the following will be set automatically at power ON.

To correct the folding stopper position and save the data, be sure to register the
corrected data. Otherwise, the corrected data will be erased when the power is turned
OFF.

When set to this mode, the folding mode, processing speed, stacker roller position

cannot be selected. Before setting this mode, perform test folding in the “normal
mode” and fix the folding stopper position, processing speed, and stacker roller
position.

To correct the folding stopper position and save the data, be sure to register the

corrected data. Otherwise, the corrected data will be erased when the power is turned
OFF.

When set to this mode, the standard folding lamp and custom folding registration lamp

will not be lit.

Setting

Last time fold mode

Normal mode

Paper size

Standard paper is automatically

detected.

When non-standard paper length is

registered, the registered data is set.

Standard paper is automatically

detected.

When using non-standard paper, the

paper length must be registered.

Folding mode

Set to the folding mode when the
power was turned OFF.

Single folding

Stacker roller position

Set to the position when the power
was turned OFF.

Default setting

Processing speed

Set to the speed when the power was
turned OFF.

Set to the speed when the power was
turned OFF.

(2) Folding stopper ﬁxed mode

Mode for omitting settings of the control panel when folding paper under the same conditions
at all times. When set to this mode, the folding stopper position, stacker roller position, and
processing speed will be ﬁxed. Therefore initial settings of the unit will be omitted when the
power is turned ON, enabling folding to be started immediately.

«
...
38
39
40
41
42
...
»

Содержание DF-1000























































































Отзывы:

Нет отзывов

Похожие инструкции для DF-1000

Бренд: Plockmatic Страницы: 31

Бренд: Plockmatic Страницы: 64

Бренд: Plockmatic Страницы: 108

Бренд: Oce Страницы: 106

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды