Duplo DF-1000, Инструкция по эксплуатации

Страница: 38 / 86

3-10
3. USING SPECIAL PAPER
3-3. B6 Size Paper
1
Loosen the two knob screws and
remove the paper ejection guide.
2
Change the stacker roller height.
Paper ejection guide
Paper may jam more easily at the stacker roller according to the paper thickness, type, and
folding mode. Perform the following procedure if paper jams frequently.
Stacker belt
Stacker roller
3
Set the operations of the stacker belt
to “CONTINUOUS” at the function
setting mode screen.
4
After completing folding operations, be sure to return the places changed in steps
1 to 3 to their original state.
Lever
< STACKER BELT >
CONTINUOUS
Auxiliary paper ejection guide
Chapter 4 TROUBLESHOOTING
“2-2. Changing the Stacker Roller
Height” (
p.4-14)
“ 4 - 7 . S t a c k e r B e l t S e t t i n g ”
(
p.3-20)
Depending on the paper thickness, type, and folding mode, the ejected paper may not be
aligned and stacked neatly on the paper receiving tray.
If paper alignment is poor, hook the auxiliary paper ejection guide to the stacker roller shaft.
<Example of paper stacked neatly>
To remove the paper ejected with the auxiliary paper ejection guide mounted, lift the
guide edge or remove the guide first.