Duplo DF-1000, Инструкция по эксплуатации

Страница: 19 / 86

1-9
Do not stack paper on the paper feed tray
with the left and right sides of the paper
unaligned or some sheets protruding out.
Do not stack paper on the paper feed tray
with the lead and trail edges unaligned or
some sheets protruding out.
If the paper is protruding on the
left or right side, the paper size
detection sensor will not function
normally and detect the paper size
accurately.
If the paper is protruding at the lead
or trail edge, paper will not be fed
stably, resulting in problems such
as paper feed error and folding
misalignment.
In some cases, paper may not be fed smoothly into the folding plate due to the
environment (temperature, humidity), paper thickness, paper type, paper states, and
processing speed, etc., and as a result, the paper may not be folded properly.
In such cases, lower the processing speed, or improve the paper states before use.
<Paper protruding on
the left and right sides>
<Paper protruding at
the lead and trail edges>
<Paper properly aligned>
Stack the paper so that the lead edge
touches the shutter gently.
I f t h e r e i s a g a p b e t w e e n t h e
lead edge and shutter, the paper
detection sensor will not function
properly.
Stack so that
there is no gap.
Paper feed tray
Shutter
Paper
4. HANDLING OF PAPER
4-2. Precautions on Stacking Paper